EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a remarkably efficient solar controller made for off-grid solar programs. Based on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and procedure stability for a wide range of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for excellent photo voltaic energy harvesting. Key options involve:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Superior MPPT Algorithm with >99% performance.
Twin-Phase Charging for enhanced battery life.
LCD Show with actual-time info monitoring.
Numerous Load Management Modes together with handbook and timer.
Detailed Digital Protections from overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Creating the EPEVER Tracer AN Collection Controller
one. Unboxing and Making ready the Controller
Make certain all elements are included: Tracer AN device, temperature sensor, interaction cables, and person manual.
Validate the product variety and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Choose a nicely-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the offered mounting brackets.
Maintain good clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Often observe correct protection protocols and make sure the technique is driven off before connecting factors.
Phase one: Hook up the battery terminals for the charge controller (favourable to optimistic, damaging to negative).
Move two: Connect the photo voltaic panel array to your PV enter terminals.
Phase 3: Join the load terminals if using a immediate load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability on the controller by connecting the battery 1st.
Make use of the Liquid crystal display Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light Management.
5. Monitoring and Information Logging
The Tracer AN Series supports real-time checking using the MT50 remote meter.
Facts might be logged via the RS485 interaction port employing software for example Solar Station Personal computer.
Remote checking is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Situation More info 2: More than-Voltage Safety
Validate the solar array’s voltage score.
Change method parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Great things about the Tracer AN Series with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lowered Electricity losses in the course of conversion.
Enhanced Dependability: Stable efficiency less than variable hundreds.
For a longer period Battery Existence: Reliable and accurate charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technological innovation is an exceptional choice for optimizing solar power technology and extending battery daily life. By next the above setup tutorial, people can ensure highest performance and method longevity.