EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE

EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Demand Controller is often a remarkably productive solar controller made for off-grid solar programs. Based on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for an array of photovoltaic (PV) programs.

Essential Characteristics with the EPEVER Tracer AN Collection Controller
The Tracer AN collection utilizes EPEVER Photo voltaic Charge Controller technologies for superior photo voltaic Strength harvesting. Key characteristics contain:

Multiphase Synchronous Rectification (MSR) for enhanced Vitality conversion.
Advanced MPPT Algorithm with >ninety nine% effectiveness.
Twin-Stage Charging for enhanced battery lifestyle.
LCD Display with real-time data checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections in opposition to overcharging, above-discharging, shorter circuits, and reverse polarity.
Move-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Make certain all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Validate the product amount and voltage rankings match your solar panel and battery specs.
two. Mounting the Charge Controller
Choose a effectively-ventilated, dry location close to the battery bank.
Protected the Tracer AN controller using the provided mounting brackets.
Sustain right clearance for heat dissipation.
three. Wiring the Solar Cost Controller
Warning: Normally abide by right security protocols and ensure the system is run off ahead of connecting elements.

Step one: Hook up the battery terminals for the charge controller (favourable to favourable, damaging to adverse).
Action two: Connect the solar panel array for the PV input terminals.
Phase three: Link the load terminals if employing a direct load relationship.
Step four: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Energy over the controller by connecting the battery initial.
Make use of the LCD display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Management.
5. Checking and Information Logging
The Tracer AN Collection supports authentic-time checking using the MT50 distant meter.
Data could be logged through the RS485 conversation port employing application for example Solar Station PC.
Distant checking is achievable With all the EPEVER WiFi module.
6. Troubleshooting Typical Troubles
Issue one: No Electricity Output

Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: About-Voltage Safety

Validate the solar array’s voltage ranking.
Modify technique parameters if necessary.
Concern three: No Battery Charging

Inspect PV wiring for continuity.
Ensure MPPT settings inside the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation makes sure:

Higher Efficiency: Lessened Vitality losses through conversion.
Enhanced Reliability: Stable overall performance below variable masses.
More time Battery Daily life: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification engineering is surely an Excellent choice for optimizing solar energy technology and increasing battery everyday living. By following the above mentioned setup guidebook, people can ensure utmost efficiency and Read more technique longevity.